[Solved] HSL SELECTIVE COLOR TOOL ISSUE

@cheastside I have asked Mabula to reply to your question.

Posted by: @wvreeven

@cheastside I have asked Mabula to reply to your question.

thanks Wouter!

Hi @cheastside,

I am not quite sure what is happening. You mean that if you want to adjust red pixels, so selecting red to adjust, then the image becomes that white all of a sudden?

Perhaps you can send me the data so I can test what is happening?

Mabula

@mabula-admin

yes, that's correct.  selecting and editing single color channel then hit calculate produces what's shown in the screen grab.  my fit file is much larger than 30mb so here's a link

https://drive.google.com/drive/folders/1vSxaVTXOU1QbhyHq0AlL2MFiEQ4fS72Q?usp=sharing

Hi Cory,

Thank you very much for sharing your issue and uploading your data.

I see the same problem, your data somehow triggers a serious problem in the HSL Selective Color tool. Each pixel that is manipulated ends up with a null value... I will investigate tomorrow to find the cause and hopefully fix it quickly.

I have one additional question for now: what capture software are you using?

Mabula

@mabula-admin

thanks Mabula.  i was using NINA 1.10 hf3 if i recall correctly

Hi Cory @cheastside,

I have found the problem and I have fixed it. The bright M31 core upset the tool... it clearly was not a data nor data capture issue 😉

It will work properly in 1.083 stable !

Mabula

@mabula-admin

excellent thanks for the quick response!  Looking forward to the stable release!